HHO Gas Hydrogen 02

And not a pulse width modulation if you have a look at video HHO Gas Hydrogen 03 this is a home made capacitor
Not to tight I used a pen to roll it on
There are 2 layers of Cooking Aluminium foil 3 meters by 120mm and 2 layers of paper 3.1 meters by 180mm the gap size is about 0.1mm
With the pulse width modulation to get the best results you need the right inductor and capacitor to get resonate and resonant frequency as well

With a 2200uF capacitor you will need a big inductor and a low frequency Hz or lower to make it resonate

The capacitor in this video was repapered and the electrolyte was removed.
It used to be a 10000mf at 25 volts with the new paper and the new electrolyte which is just water the mf are a lot less

but you will need to swap the + and — every few minute so it won't oxide up so much

Thank you for your Comments
All of the videos are done with Direct current DC off a power supply that operates from 0 to 30 volts and 0 to 20 amps

i just tested my PWM with 400V 2200uF capacitor. sadly the production of hho did not changed. can you tell us what kind of capacitor you used?

Thank you for your Comments
To get the best result with the inductor and capacitor is to use a pulse width modulation controller i.e. this circuit operates by transferring energy back and forth between C and L. A circuit that does this is said to resonate, and the particular frequency at which this phenomenon occurs is known as the resonant frequency of the circuit. This resonant frequency is determined by the values of L and C

i wonder what will happen if you use capacitor with inductor.
is it possible amperage can reduce by this way?

Thank you for your Comments
Yes the water dose heat up but not as much as the plate system. this is just rainwater and nothing else added

i knew it…the key is capacitor.
dose water heat up?

Fact: The water molecule has a positive end and a negative end. If placed in a magnetic field it will rotate itself accordingly. Pulse that magnetic field N S N S and it will spin. Spinning induces centrifugal force. The faster the frequency of the pulse the faster the spin. The faster the spin the stronger the centrifugal force. Spin it fast enough to overcome the molecular bonding and PRESTO! Separation. First grade Physics.

Thank you for your Comments
I used Kitchen towel the real thin type that seem to work real well and Aluminium foil
The design is the same as any high capacitance capacitor
My design is the same but with rainwater and paper and Aluminium foil

There are 2 layers of foil 3 meters by 120mm and 2 layers of paper 3.1 meters by 180mm the gap size is about 0.1mm

do you have more on the process? or direction to look for more information

white with 2 sugers thanx.

give me a few days I make a new video and show how it's done

Tell us more

HHO Gas With Just 12 Volts 5 Amps Repapered capacitor with rainwater