HHO SWISS INOX 4 SPIRAL CELL + GAS PRODUCTION TESTS

316L Stainless Steel and only distilled water or demineralized and deionized water.
But before this the steel has to be cleansed with rubbing alcohol so that it is perfectly clean.
Good luck.
AMOX

can you tell me what kind of stainless are you using??? because my hho generator gets dirty huhuhuhuhu pls help

Have you ever seen someone drop a Mentos candy into a bottle of soda? It erupts violently. Why? Because the grainy porous surface area makes the reaction quick. My friend, you need to sand-blast the surface of your electrodes. This info is my gift to you. You are welcome!

@revolxaohemwolb the reason why its good is because its more portable than electricity (due to expensive and inefficent battery tech) and is still more efficient than gasoline. on top of it, who wouldn't love to blow stuff up safely because the Hydrogen will not explode unless released from its container.

Bellissima la dedica all'amico italiano!!!

Saluti dall'italia!!!

ammanninox,

Good Day!
I have a question for you regarding on the HHO. How can we increase the production of the HHO during hydrolysis?
Thanks!

gianagianan

To you revolxaohemwolb The Universe is such a mistery nobody knows how it came to be where the energy comes from, nobody even knows what energy really is and as for the 2nd law of t.dynamics….well there is new and modern evidence that opens totally unsuspected avenues. Remember also that life itself is a totally free lunch.
All I do is having fun and I love it I do not have to demonstrate anything to anybody, lucky you that you have eaten intelligence with full spoons…..

So, I dunno if I believe the claim that some people get 15 more miles per gallon, but then again, who knows. They may have a more efficient design, a computer that is more tolerant/flexible etc, then I do. After all, I made mine from stainless sheet metal scrap and a glidden plastic one gallon paint container.

furthermore I have tried this on a full drive to empty several times. This vehicle almost always reads around 280 on trip when guage reaches 1/4.

With the fuel cell running, the guage is almost always just under half at 280 on the trip meter. vehicle does around 23 on the highway. With the fuel cell, I am guessing it does anywhere from 3 to a low 5 miles more per gallon.

Even if it actually is 3, that is worth it to me.
because now I get 60+ more miles to the tank which holds 16 gallons.

On a 95 nissan quest 3.0 shitbox, if filled to overflowing, I can drive almost precisely fifty miles before fuel gauge moves to the full mark from above full. with the generator switched on, and the same conditions applied, it would go around 10 – 12 miles give or take more before dropping to full.

bullshit. Stop the copy and paste crap also.

You have said the identical crap elsewhere.

about 20 to 25 percent of the fuel (petrol) introduced into the engine fails to ignite and is pushed out of the system thru the exuast.

The introduction of hho is not "meant" to be a miracle self sustaining solution.

It is meant to enter the system, mix with the vaporized fuel and complete the cumbustion cycle more efficiently.

its not free energy, you fill it with water and the water will need to be refilled if gasoline was above ground would you call cars useing free energy? energy cannot be created nor destroyed so you could either say nothing uses free energu or you could just as equally say everything uses free energy

"HHO" is a HHOax. These silly things take more energy from the crankshaft than they return. They will REDUCE fuel economy, but will NEVER increase it! Not unless you can find a 100% efficient alternator belt, 100% efficient alternator, 100% efficient electrolyser and a 100% efficient internal combustion engine, "HHO" systems won't do so much as break even. The 2nd Law of Thermodynamics says 'no free lunch!'

On your second cell the electricity is lost on the sharp edged corners, look up the joe cell if you want to do way better, i discovered ORMES in my cell, this is the fine whit powder that builds up on the cell walls.

@ammanninox

I have an unusual question. I am working on an invention that as a byproduct is producing unwanted hydrogen. What could I do with it? How could I safely dispose of it or better, how could it be used in relative small quantities

on your zero cell you've got to seal the tops sides and the bottom of the cell and the water level should not go over the top of the plates. Thats the only way it will work.

Thank you for the response…so, this was the first video of yours that I had watched; and after viewing others, I got your comment about the design being inefficient – as it were – and a heater of water

Your videos are great….the quality of your workmanship is awesome to behold as well

I look forward to seeing your reliable cell. Chances are that what ever workable design you'll ultimately discover, it will have already been invented and protected by a patent

Best of luck

Peace

Look, 41 amps is totally out of question, because all it does is heating the water real fast, and yes run down your battery just as fast. This was some early testing of mine now I have come a long way changed many things and I have a broader vision of what electrolysis is and what it is not.
Basically all I do is having fun experimenting and lately I am having fun putting together a cell that is commercially interesting and reliable.
I hope to be ready by january

Forgive my extreme basic question/assumption here on your set up; but, at 41 amps…how long is your battery going to last? I'm not ignorant to the big picuture…I assume this gas will ultimately fuel an engine which would hopefully be able to do real work and recharge the battery.

Excellent video. I love it when the theory of science is put to the test.

Subscribed
5*

Peace

This is so cool what you are doing! I'd love to be able to do things like this one day!

I hear that 15amps is the best.

Thankyou for this vid its very helpful and well put together i like the spiral idea its brilliant

Hi! with regards to your 13 plate cell, try to lessen the plates in-between the positive and negative. you should get better results from that. my 9-plate cell is pushing around 1.5l/min of hho gas in half a liter of distilled water and 0.05 molar of NaOH with 13.8vdc and 15A. it's 3 plates in between the + and – plates.

here is my configuration:

+nnn-nnn+

hope this helps you.

if u realy want high production use 316 stainless steel screen . this increases surface area alot . and increase the number of terminals +-+-+- about an 1/8 th inch apart .the 316 stainless wond degrade in the electrolosis.

Hei use a PWM!!. It increase the output very much. And the cell did not produce any heat, it remains cold.