hydrogen fuel cell generator 427 big block

cut the music so we can concentrate on what you have to say. More people do this and your presentation is almost worthless. Really

None of this is to enrage anyone by the way just tying to be constructive. good work on the temperature control you have goin on there!

Example:: You poke a hole in your intake and dont put you hydrogen line in? what happens? You go way lean and you are sucking extra air past the mass airflow sensor. right????? then your cpu will try to even it out and enrich the mixture. wating gas. it is simply the opposite occuring by dumping the hydrogen into the intake. ——— and then there is still the prob. that the hydrogen is explosive in current fuel air form. comments???

And have some way to map the computer to compansate for the extra fuel that the o2 sensors will read. Then you may be able to use your fuel cell. and get some real results. I dont know why no one is discussing this??? adding the fuel and getting the cpu to go lean and increase your fuel milege can be done the same way by installing a economy chip in the veichle. they come somewhere down the middle from the factory. not performance not srict economy. Can anyone add to this?

That said. right there you are flawed. as this hydrogen gas will simply explode as soon as it comes in contact with anything hot enough. more thank likely a hot valve. even if it makes it to the power stroke it is detonation. not good not fuel saving and damageing to the engine. I am not sure but I believe hydrogen with burn with a flame from 4% to 20% fuel air with out explodeing like when you light the bubbles. If you could get a fuel air mix like that, that is burnable

by putting this extra gas into a trucks intake. you are causeing a rich fuel air mixture and causeing the computer to lean out. That is your fuel savings. it is not so simple as to plug it right into the intake and walla!!! and in the form that hydrogen is comeing out it is strictly explosive in that state of hydrogen to oxygen. fuel in a combustion engine has got to burn. flame propogation from the spark plug.

you are not producing 4-5 lpm!!! look at my videos too see what 4-5 lpm looks like! and you need to calculate the mmw ….scott